#include <doppvel.h>
Collaboration diagram for t_DoppVel:
Data Fields | |
realnum | doppler [LIMELM+3] |
double | AveVel [LIMELM+3] |
realnum | TurbVel |
realnum | TurbVelZero |
realnum | TurbVelLaw |
bool | lgTurbLawOn |
realnum | Heiles_Troland_F |
bool | lgTurb_pressure |
bool | lgTurbEquiMag |
realnum | DispScale |
Definition at line 8 of file doppvel.h.
double t_DoppVel::AveVel[LIMELM+3] |
average velocity of atoms/ions in gas, for grain charging and heating
Definition at line 16 of file doppvel.h.
Referenced by GrainChrgTransferRates(), GrainCollHeating(), GrainElecRecomb1(), and velset().
The scale in cm over which the turbulence is dissipated. Normally 0, only set if dissipate keyword appears on turbulence command, entered as log of scale
Definition at line 50 of file doppvel.h.
Referenced by PrtComment(), and velset().
doppler width for each element, cm/sec including turbulent, as set in routine velset, extra elements are 12CO, 13CO, and H2
Definition at line 13 of file doppvel.h.
Referenced by t_fe2ovr_la::atoms_fe2ovr(), CoolCalc(), DrvContPump(), FeIILyaPump(), hmole_reactions(), PressureRadiationLine(), pun1Line(), RT_line_all(), RT_line_one(), RT_line_one_tauinc(), RT_line_static(), RT_LineWidth(), RTesc_lya(), th85rate_co(), and velset().
this is the factor F in equation 34 of >>refer pressure turb Heiles, C. & Troland, T.H. 2005, 624, 773
Definition at line 36 of file doppvel.h.
Referenced by Magnetic_evaluate().
equipartition option on turbulence command, to set turbulence from B if true then TurbVel set from B
Definition at line 45 of file doppvel.h.
Referenced by Magnetic_evaluate().
this flag says that a turbulent velocity law (as a function of depth) has been set with the vlaw command
Definition at line 32 of file doppvel.h.
Referenced by ZoneStart().
this is the turbulent velocity in cm/s, normally zero, set with turbulence command
Definition at line 20 of file doppvel.h.
Referenced by lines_lv1_li_ne(), Magnetic_evaluate(), velset(), and ZoneStart().
this is the turbulent velocity in cm/s, normally zero, set with turbulence command
Definition at line 28 of file doppvel.h.
Referenced by ZoneStart().
this is the turbulent velocity in cm/s at the beginning of the calculation, this is only important if turbulence law is set with vlaw command
Definition at line 24 of file doppvel.h.
Referenced by ZoneStart().