radius_first.cpp

Go to the documentation of this file.

/* This file is part of Cloudy and is copyright (C)1978-2017 by Gary J. Ferland and
 * others.  For conditions of distribution and use see copyright notice in license.txt */
/*radius_first derive thickness of first zone, called after conditions in first zone 
 * are established, sets 
radius.drad_x_fillfac
radius.drad
 */
#include "cddefines.h"
#include "wind.h"
#include "stopcalc.h"
#include "thermal.h"
#include "dynamics.h"
#include "trace.h"
#include "save.h"
#include "pressure.h"
#include "iso.h"
#include "h2.h"
#include "dense.h"
#include "mole.h"
#include "hmi.h"
#include "geometry.h"
#include "iterations.h"
#include "opacity.h"
#include "ipoint.h"
#include "radius.h"
#include "rfield.h"

void radius_first(void)
{
        long int i ,
                ip;

        bool lgDoPun;

        int indexOfSmallest = 0;

        const double Z = 1.0001;
        const int NUM_DR_TYPES = 13;

        struct t_drValues{
                double dr;
                string whatToSay;
        } drValues[NUM_DR_TYPES];

        double accel, 
          BigOpacity, 
          dr912, 
          drH2 ,
          drContPres ,
          drOpacity ,
          drStromgren, /* used for Stromgren length */
          drTabDen, 
          dradf, 
          drcol, 
          dr_time_dep,
          drthrm, 
          factor, 
          winddr;
        static double drad_last_iteration=-1.;

        DEBUG_ENTRY( "radius_first()" );

        /***********************************************************************
         *
         * wind model, use acceleration length                          
         *
         ***********************************************************************/

        if( wind.lgBallistic() )
        {
                /* evaluate total pressure, although value not used (so stuffed into dr912) */
                /* >>chng 01 nov 02, remove call, confirm vals defined with assert */
                ASSERT( dense.pden > 0. && dense.wmole > 0. );
                accel = 1.3e-10*dense.pden*dense.wmole;
                winddr = POW2(wind.windv)/25./accel;
        }
        else
        {
                winddr = 1e30;
        }

        /* key off of Lyman continuum optical depth */
        if( StopCalc.taunu > 0.99 && StopCalc.taunu < 3. )
        {
                dr912 = StopCalc.tauend/6.3e-18/(dense.xIonDense[ipHYDROGEN][0]*geometry.FillFac)*Z/50.;
        }
        else
        {
                dr912 = 1e30;
        }

        if( dynamics.lgTimeDependentStatic && iteration > 2 )
        {
                /* when time dependent case on do not let dr change since current continuum
                 * is not good indicator of conditions */
                dr_time_dep = drad_last_iteration;
        }
        else
        {
                dr_time_dep = 1e30;
        }

        /***********************************************************************
         *
         * key off of column density; total, neutral, or ionized                          
         *
         ***********************************************************************/

        if( StopCalc.HColStop < 5e29 )
        {
                /* this is useful for very thin columns, normally larger than 1st DR */
                drcol = log10(StopCalc.HColStop) - log10(dense.gas_phase[ipHYDROGEN]*geometry.FillFac* 20.);
        }
        else if( StopCalc.colpls < 5e29 )
        {
                /* ionized column density */
                drcol = log10(StopCalc.colpls) - log10(dense.xIonDense[ipHYDROGEN][1]*geometry.FillFac* 20.);
        }
        else if( StopCalc.colnut < 5e29 )
        {
                /* neutral column density */
                drcol = log10(StopCalc.colnut) - log10(dense.xIonDense[ipHYDROGEN][0]*geometry.FillFac*50.);
        }
        else if( StopCalc.col_species < 5e29 )
        {
                /* arbitrary species */
                drcol = log10(StopCalc.col_species) -
                                log10(findspecieslocal_validate(StopCalc.chSpeciesColumn.c_str())->den*geometry.FillFac*50.);
        }
        else
        {
                /* not used */
                drcol = 30.;
        }
        /* finally convert the drived column density to linear scale */
        drcol = exp10(MIN2(35.,drcol));

        /***********************************************************************
         *
         * key off of density or abundance fluctuations, must be small part of wavelength                          
         *
         ***********************************************************************/

        if( dense.flong != 0. )
        {
                /* flong set => density fluctuations */
                dradf = PI2/dense.flong/10.;
                dradf = MIN4(dradf,iterations.StopThickness[iteration-1]*Z,drcol,dr912);
        }
        else
        {
                dradf = FLT_MAX;
        }

        /* >>>chng 99 nov 18, add check on stromgren length */
        /* estimate Stromgren length, but only if there are ionizing photons
         * and not constant temperature model */
        if( (rfield.qhtot>0.) && (rfield.qhtot> rfield.qbal*0.01) && (rfield.uh>1e-10) )
        {
                /* >>chng 99 dec 23, double to allow lte.in to work on alphas */
                /* >>chng 03 mar 15, density to double to avoid overflow, PvH */
                drStromgren = (double)(rfield.qhtot)/iso_sp[ipH_LIKE][ipHYDROGEN].RadRec_caseB/
                        POW2((double)dense.gas_phase[ipHYDROGEN]);

                // Hubble radius is largest value
                drStromgren = MIN2(1e28 , drStromgren );

                /* different logic if this is a sphere */
                if( drStromgren/radius.rinner > 1. )
                {
                        /* >>chng 03 mar 15, to double to avoid FP overflow, PvH */
                        drStromgren = (double)rfield.qhtot*3./(radius.rinner*
                            iso_sp[ipH_LIKE][ipHYDROGEN].RadRec_caseB*POW2((double)dense.gas_phase[ipHYDROGEN]) );
                        drStromgren += 1.;
                        /* this results in r_out / r_in */
                        drStromgren = cbrt(drStromgren);
                        /* make it a physics thickness in cm */
                        drStromgren *= radius.rinner;
                }

                /* remember the Stromgren thickness */
                radius.thickness_stromgren = (realnum)drStromgren;

                /* take one hundredth of this, do nothing if near underflow */
                if( drStromgren > SMALLFLOAT *100.)
                        drStromgren /= 100.;
        }
        else
        {
                drStromgren = FLT_MAX;
                radius.thickness_stromgren = FLT_MAX;
        }

        /***********************************************************************
         *
         * find largest opacity, to keep the first zone optical depth 1
         * this is usually the physics that sets the first zone thickness
         *
         ***********************************************************************/

        /* >>>chng 99 jun 25, this is to simulate behavior of code before extension
         * of continuum array to 1e-8 Ryd */
        ip = ipoint(1e-5);

        /* find largest opacity */
        BigOpacity = 0.;
        for( i=ip; i < rfield.nflux; i++ )
        {
                /* remember largest opacity, and energy where this happened,
                 * make sure flux at energy is gt 0, can be zero for case where
                 * nflux increased to include emission from some ions */
                // >>chng 13 oct 13 test for all fluxes to get consistent results
                // with -DFLT_IS_DBL for ism_hot_brems: need to resolve line escape
                // even when incoming flux is zero
                if( opac.opacity_abs[i] > BigOpacity )
                {
                        BigOpacity = opac.opacity_abs[i];
                }
        }
        /* BigOpacity may be zero on very first call */

        /* drChange set with set didz command, is only number set with this command,
         * default in zerologic is 0.15 
         * set drad to small part of*/
        drOpacity = safe_div((radius.drChange/100.),BigOpacity*geometry.FillFac,
                                                                1e30);

        /***********************************************************************
         *
         * thermalization length of typical lines
         *
         ***********************************************************************/

        drthrm = 1.5e31/MAX2(1.,POW2((double)dense.gas_phase[ipHYDROGEN]));
        /* thermalization length is irrelevant above critical density, which we
         * regard as 1e16 cm-3.  Put a floor at the corresponding drthrm. */
        drthrm = MAX2( 0.15, drthrm );

        /***********************************************************************
         *
         * make sure we resolve initial structure in dense_tabden command
         * if interpolated table we need to make sure that we resolve the 
         * initial changes in the structure
         *
         ***********************************************************************/

        if( strcmp(dense.chDenseLaw,"DLW2") == 0 )
        {
                drTabDen = 1.;
                i = 1;
                factor = 0.;
                while( i < 100 && factor < 0.05 && radius.Radius+drTabDen*2.<iterations.StopThickness[0] )
                {
                        /* check densities at ever larger dr's, until factor becomes more than 5% */
                        factor = dense.gas_phase[ipHYDROGEN]/
                                dense.DLW.tabval(radius.Radius+drTabDen, drTabDen );
                        /* density change can be positive or negative sign */
                        factor = fabs(factor-1.);
                        drTabDen *= 2.;
                        i += 1;
                }
                drTabDen /= 2.;
        }
        else
        {
                drTabDen = 1e30;
        }

        /* >>chng 04 mar 14 go back to original logic since molecular
         * pdr's had big jump in conditions from
         * first to second zon even when most H in H2
        change = 0.1; */
        /* >>chng 04 apr 18, change from 0.1 to 0.001, inital zones too large in 
         * leiden test case f1 */
        double change = 0.001;

        /* >>chng 04 mar 13, not too large when big H2 is on */
        if( h2.lgEnabled  && h2.lgEvaluated )
        {
                if( fabs(h2.HeatDexc)/thermal.ctot > 0.05 )
                {
                        /* changes in H2 heating caused by changes in solomon rate
                         * would drive temperature failures */
                        /* >>chng 04 apr 18, change from 0.001 to 0.0001, inital zones too large in 
                         * leiden test case f1 */
                        change = 0.0001;
                }
                else
                {
                        /* >>chng 04 apr 18, change from 0.01 to 0.001, inital zones too large in 
                         * leiden test case f1 */
                        change = 0.001;
                }
        }
        drH2 = change / SDIV( 
                hmi.H2_total * geometry.FillFac * hmi.H2Opacity );

        /* >>chng 06 feb 01, very high U ulirg models had dramatic increase in
         * cont pre in first few zones,
         * in constant total pressure case, don't want acceleration across first zone to
         * be large compared with current gas pressure */
        if( (strcmp( dense.chDenseLaw, "CPRE" )==0) && pressure.lgContRadPresOn )
        {
                /* radiative acceleration was evaluated in PressureTotal */
                drContPres = 0.;
                if( wind.AccelTotalOutward > 0. || wind.AccelTotalOutward < 0. )
                        drContPres = 0.05 * pressure.PresTotlCurr / 
                                fabs((double)wind.AccelTotalOutward*dense.xMassDensity*geometry.FillFac*geometry.DirectionalCosin);
        }
        else if( !wind.lgStatic() )
        {
                /* acceleration and change in v in wind */
                double g = fabs(wind.AccelTotalOutward-wind.AccelGravity);
                /* wind - do not let velocity change by too much */
                drContPres = 0.05*POW2(wind.windv)/(2.*SDIV(g));
        }
        else
                drContPres = 1e30;

        drValues[0].dr  = drOpacity;
        drValues[1].dr  = radius.Radius/20.;
        drValues[2].dr  = drStromgren;
        drValues[3].dr  = iterations.StopThickness[iteration-1]/10.;
        drValues[4].dr  = drcol;
        drValues[5].dr  = dr912;
        drValues[6].dr  = drthrm;
        drValues[7].dr  = winddr;
        drValues[8].dr  = dradf;
        drValues[9].dr  = drTabDen;
        drValues[10].dr = drH2;
        drValues[11].dr = drContPres;
        drValues[12].dr = dr_time_dep;

        drValues[0].whatToSay = "drOpacity";
        drValues[1].whatToSay = "radius.Radius/20.";
        drValues[2].whatToSay = "drStromgren";
        drValues[3].whatToSay = "iterations.StopThickness[iteration-1]/10.";
        drValues[4].whatToSay = "drcol";
        drValues[5].whatToSay = "dr912";
        drValues[6].whatToSay = "drthrm";
        drValues[7].whatToSay = "winddr";
        drValues[8].whatToSay = "dradf";
        drValues[9].whatToSay = "drTabDen";
        drValues[10].whatToSay = "drH2";
        drValues[11].whatToSay = "drContPres";
        drValues[12].whatToSay = "dr_time_dep";

        for( i=0; i<NUM_DR_TYPES; i++ )
        {
                if( drValues[i].dr < drValues[indexOfSmallest].dr )
                {
                        indexOfSmallest = i;
                }
        }

        radius.drad = drValues[indexOfSmallest].dr;

        double rfacmin = radius.lgSdrminRel ? radius.Radius : 1.;
        /* reset if radius.drad is less than radius.sdrmin */
        if( rfacmin*radius.sdrmin >= radius.drad )
        {
                radius.drad = rfacmin*radius.sdrmin;
                /* set flag for comment if the previous line forced a larger dr than
                 * would otherwise have been chosen.  will cause comment to be generated
                 * in PrtComment if set true*/
                radius.lgDR2Big = true;
        }
        else
        {
                radius.lgDR2Big = false;
        }

        /* this min had been in the big min set above, but caused a false alarm
         * on the lgDR2Big test above since the set dr command sets both in and max */
        // lgSdrmaxRel true if sdrmax is relative to current radius, false if limit in cm
        double rfacmax = radius.lgSdrmaxRel ? radius.Radius : 1.;
        radius.drad = MIN2( rfacmax*radius.sdrmax, radius.drad );
        radius.drad_mid_zone = radius.drad/2.;

#if     0
        /***********************************************************************
         *
         * we have now generated range of estimates of first thickness,
         * now choose smallest of the group
         *
         ***********************************************************************/

        /* radius div by 20, to prevent big change in iron ionization for high ioniz gas,
         * this is also the ONLY place that sphericity comes in */
        radius.drad = MIN4( MIN3( drOpacity, radius.Radius/20., drStromgren ),
                            MIN3( iterations.StopThickness[iteration-1]/10., drcol, dr912 ),
                            MIN4( drthrm, winddr, dradf, drTabDen ),
                            MIN3( drH2, drContPres, dr_time_dep ) );

        /* option to set lower limit to zone thickness, with set drmin command*/
        radius.drad = MAX2( radius.drad, rfacmin*radius.sdrmin );

        /* set flag for comment if the previous line forced a larger dr than
         * would otherwise have been chosen.  will cause comment to be generated
         * in PrtComment if set true*/
        if( fp_equal( radius.drad, rfacmin*radius.sdrmin ) )
        {
                radius.lgDR2Big = true;
        }
        else
        {
                radius.lgDR2Big = false;
        }

        /* this min had been in the big min set above, but caused a false alarm
         * on the lgDR2Big test above since the set dr command sets both in and max */
        radius.drad = MIN2( rfacmax*radius.sdrmax, radius.drad );
#endif

        radius.drad_x_fillfac = radius.drad * geometry.FillFac;

        /* save dr for this iteration */
        drad_last_iteration = radius.drad;

        /* drMinimum is smallest acceptable DRAD, and is 1/100 OF DRAD(1) */
        /* this can be turned off by GLOB command */
        if( radius.lgDrMnOn )
        {
                /* >>chng 05 mar 05, drMinimum is now drad * hden, to make propro to optical depth
                 * avoid false trigger across thermal fronts 
                 * add * dense.gas_phase */
                /* NB - drMinimum not used in code - delete? */
                radius.drMinimum = (realnum)(radius.drad * dense.gas_phase[ipHYDROGEN]/1e7);
        }
        else
        {
                radius.drMinimum = 0.;
        }

        /* if set drmin is used, make sure drMinimum (which will cause an abort) is
         * smaller than drmin */
        if( radius.lgSMinON )
        {
                /* >>chng 05 mar 05, drMinimum is now drad * hden, to make propro to optical depth
                 * avoid false trigger across thermal fronts 
                 * add * dense.gas_phase */
                /* NB - drMinimum not used in code - delete? */
                radius.drMinimum = MIN2(radius.drMinimum * dense.gas_phase[ipHYDROGEN],
                                        (realnum)(rfacmin*radius.sdrmin/10.f) );
        }

        if( trace.lgTrace )
        {
                fprintf( ioQQQ, 
                        " radius_first called, finds dr=%13.5e drMinimum=%12.3e sdrmin=%10.2e sdrmax=%10.2e\n", 
                         radius.drad, radius.drMinimum/ dense.gas_phase[ipHYDROGEN],
                         rfacmin*radius.sdrmin, rfacmax*radius.sdrmax );
        }

        if( radius.drad < SMALLFLOAT*1.1 )
        {
                fprintf( ioQQQ, 
                        " PROBLEM radius_first detected likely insanity, found dr=%13.5e \n", radius.drad);
                fprintf( ioQQQ, 
                        " radius_first: calculation continuing but crash is likely. \n");
                /* this sets flag that insanity has occurred */
                TotalInsanity();
        }

        /* all this is to only save on last iteration
         * the save dr command is not really a save command, making this necessary
         * lgDRon is set true if "save dr" entered */
        if( save.lgDROn )
        {
                lgDoPun = true;
        }
        else
        {
                lgDoPun = false;
        }

        /* save what we decided up? */
        if( lgDoPun )
        {
                /* create hash marks on second and later iterations */
                if( iteration > 1 && save.lgDRHash )
                {
                        static int iter_punch=-1;
                        if( iteration !=iter_punch )
                                fprintf( save.ipDRout, "%s\n",save.chHashString );
                        iter_punch = iteration;
                }
                /* this is common part of each line, the zone count, depth, chosen dr, and depth2go */
                /* >>chng 05 aug 15, had printed drNext, always zero, rather the drad, which is set here */
                fprintf( save.ipDRout , "%ld\t%.5e\t%.3e\t%.3e\t", nzone, radius.depth, radius.drad, radius.Depth2Go );

                if( radius.lgDR2Big )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from radius.sdrmin\n");

                }
                else if( fp_equal( radius.drad, rfacmax*radius.sdrmax ) )
                {

                        fprintf( save.ipDRout, 
                                "radius_first keys from radius.sdrmax\n");
                }
                else
                {
                        ASSERT( indexOfSmallest < NUM_DR_TYPES - 1 );
                        fprintf( save.ipDRout, "radius_first keys from %s\n", 
                                                drValues[indexOfSmallest].whatToSay.c_str());
                }

                /* \todo        1 improve this printout and the drValues treatment above. */

#if     0
                if( fp_equal( radius.drad, drOpacity ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from drOpacity, opac was %.2e at %.2e Ryd\n", 
                           BigOpacity , BigOpacityAnu );
                }
                else if( fp_equal( radius.drad, radius.Radius/20. ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from radius.Radius\n" );
                }
                else if( fp_equal( radius.drad, drStromgren ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from drStromgren\n");
                }
                else if( fp_equal( radius.drad, dr_time_dep ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from time dependent\n");
                }
                else if( fp_equal( radius.drad, iterations.StopThickness[iteration-1]/10. ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from iterations.StopThickness[iteration-1]\n");
                }
                else if( fp_equal( radius.drad, drcol ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from drcol\n");
                }
                else if( fp_equal( radius.drad, rfacmin*radius.sdrmin ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from radius.sdrmin\n");
                }
                else if( fp_equal( radius.drad, dr912 ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from dr912\n");
                }
                else if( fp_equal( radius.drad, rfacmax*radius.sdrmax ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from radius.sdrmax\n");
                }
                else if( fp_equal( radius.drad, drthrm ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from drthrm\n");
                }
                else if( fp_equal( radius.drad, winddr ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from winddr\n");
                }
                else if( fp_equal( radius.drad, drH2 ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from H2 lyman lines\n");
                }
                else if( fp_equal( radius.drad, dradf ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from dradf\n");
                }
                else if( fp_equal( radius.drad, drTabDen ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from drTabDen\n");
                }
                else if( fp_equal( radius.drad, drContPres ) )
                {
                        fprintf( save.ipDRout, 
                                "radius_first keys from radiative acceleration across zone\n");
                }
                else
                {
                        fprintf( save.ipDRout,  "radius_first insanity\n" );
                        fprintf( ioQQQ, "radius_first insanity, radius is %e\n" ,
                                radius.drad);
                        ShowMe();
                }
#endif

        }
        return;
}