#include <radius.h>
Data Fields | |
double | rinner |
double | Radius |
double | Radius_mid_zone |
double | drad |
double | drad_mid_zone |
double | depth |
double | depth_mid_zone |
double | Depth2Go |
double | r1r0sq |
double * | StopThickness |
double * | StopRadius |
double | drNext |
double | distance |
double | dRadSign |
double | drad_x_fillfac |
double | drad_x_fillfac_mean |
double | depth_x_fillfac |
double | darea_x_fillfac |
double | dVeffVol |
double | dVeffAper |
double | dRNeff |
double | dVolOutwrd |
double | dVolReflec |
double | BeamInIn |
double | BeamInOut |
double | BeamOutOut |
bool | lgdR2Small |
bool | lgRadiusKnown |
double | CylindHigh |
bool | lgCylnOn |
double | rdfalt |
realnum | glbden |
realnum | glbrad |
realnum | glbpow |
realnum | glbdst |
bool | lgDrMnOn |
bool | lgPredLumin |
realnum | pirsq |
double | Conv2PrtInten |
double | sdrmin |
double | sdrmax |
bool | lgSdrminRel |
bool | lgSdrmaxRel |
bool | lgSMinON |
bool | lgDR2Big |
realnum | drMinimum |
double | dr_min_last_iter |
double | dr_max_last_iter |
bool | lgDrMinUsed |
realnum | drChange |
realnum | thickness_stromgren |
Definition at line 19 of file radius.h.
double t_radius::BeamInIn |
Beam vars are related to lines where inward and outward fracs known BeamInIn inward part of inwardly directed beam, 0 if sphere
Definition at line 105 of file radius.h.
Referenced by transition::outline(), outline_base_bin(), and ZoneStart().
double t_radius::BeamInOut |
BeamInOut outward part of inwardly directed beam, 0 if not sphere
Definition at line 108 of file radius.h.
Referenced by transition::outline(), outline_base_bin(), RT_diffuse(), and ZoneStart().
double t_radius::BeamOutOut |
BeamOutOut outward part of outwardly directed beam
Definition at line 111 of file radius.h.
Referenced by outline_base_bin(), RT_diffuse(), and ZoneStart().
double t_radius::Conv2PrtInten |
additive factor to convert stored line intensities within code into a final desired unit, luminosity, flux at Earth, or surface brightness
Definition at line 150 of file radius.h.
Referenced by cdH2_Line(), cdLine(), cdLine_ip(), conorm(), FeIISaveLines(), H2_PunchDo(), iter_end_check(), lines_continuum(), optimize_func(), PrtFinal(), PrtLineSum(), and SaveDo().
double t_radius::CylindHigh |
lgCylnOn set true when cylinder command given cylind is half height in centimeters
Definition at line 123 of file radius.h.
Referenced by ParseCylinder(), zero(), and ZoneStart().
double t_radius::darea_x_fillfac |
darea_x_fillfac is 2pi * radius * drad * filling factor
Definition at line 80 of file radius.h.
Referenced by t_mean::MeanInc(), zero(), and ZoneStart().
double t_radius::depth |
the depth, the distance from the outer edge of current zone to the illuminated face
Definition at line 22 of file radius.h.
Referenced by AbundancesSet(), DynaEndZone(), DynaIonize(), DynaIterEnd(), DynaPresChngFactor(), DynaStartZone(), GetAveVelocity(), GetDopplerWidth(), highen(), iter_end_check(), IterEnd(), lgCheckMonitors(), lgConvPres(), ParseCommands(), PressureChange(), PresTotCurrent(), PrtComment(), radius_first(), radius_increment(), radius_next(), RT_continuum(), RT_line_one_tauinc(), SaveDo(), SaveSpecial(), zero(), and ZoneStart().
double t_radius::Depth2Go |
an estimate of the depth to the shielded face
Definition at line 22 of file radius.h.
Referenced by radius_first(), radius_next(), and ZoneStart().
double t_radius::depth_mid_zone |
depth from illuminated face to center of last or current zone
Definition at line 22 of file radius.h.
Referenced by CoolSave(), DynaSave(), H2_PunchDo(), PrtZone(), save_line(), Save_Line_RT(), SaveDo(), SaveHeat(), zero(), and ZoneStart().
double t_radius::depth_x_fillfac |
integrated dReff, integral of depth times filling factor
Definition at line 77 of file radius.h.
Referenced by lgCheckMonitors(), PrtFinal(), RT_line_fine_opacity(), zero(), and ZoneStart().
double t_radius::distance |
the distance to the object from Earth, set with the distance command
Definition at line 65 of file radius.h.
Referenced by conorm(), optimize_func(), ParseDistance(), PrtFinal(), and zero().
double t_radius::dr_max_last_iter |
Definition at line 177 of file radius.h.
Referenced by DynaIterEnd(), IterStart(), and ZoneStart().
double t_radius::dr_min_last_iter |
min and max dr found in previous iteration
Definition at line 176 of file radius.h.
Referenced by IterStart(), and ZoneStart().
double t_radius::drad |
the thickness of the current zone
Definition at line 22 of file radius.h.
Referenced by ConvInitSolution(), DynaEndZone(), GravitationalPressure(), IterRestart(), IterStart(), lgConvPres(), PresTotCurrent(), PrtZone(), radius_first(), radius_increment(), radius_next(), RT_continuum(), SaveDo(), SaveSpecial(), zero(), and ZoneStart().
double t_radius::drad_mid_zone |
the distance between middle of previous zone and middle of this zone
Definition at line 22 of file radius.h.
Referenced by ConvInitSolution(), IterRestart(), radius_first(), zero(), and ZoneStart().
double t_radius::drad_x_fillfac |
drad_x_fillfac is drad * filling factor
Definition at line 71 of file radius.h.
Referenced by ConvInitSolution(), FeII_Colden(), GravitationalPressure(), H2_Colden(), iter_end_check(), IterEnd(), IterStart(), t_mean::MeanInc(), molcol(), radius_first(), radius_increment(), RT_continuum(), RT_line_one_tauinc(), RT_tau_inc(), SaveDo(), t_fe2ovr_la::tau_inc(), zero(), and ZoneStart().
mean of the above over past few zones
Definition at line 74 of file radius.h.
Referenced by RT_line_all(), RT_line_pumping(), zero(), and ZoneStart().
double t_radius::dRadSign |
sign of dr for going in or out, 1 (usually) or -1
Definition at line 68 of file radius.h.
Referenced by GravitationalPressure(), ParseRoberto(), RT_continuum(), zero(), and ZoneStart().
fractional change used in nextdr
Definition at line 183 of file radius.h.
Referenced by InitDefaultsPreparse(), ParseSet(), radius_first(), and radius_next().
fraction of initial thickness, set in firstdr do not let dr get smaller than this NB - drMinimum not used in code - delete?
Definition at line 173 of file radius.h.
Referenced by radius_first(), and radius_next().
double t_radius::dRNeff |
dRNeff is next dr effective radius
Definition at line 93 of file radius.h.
Referenced by DrvContPump(), zero(), and ZoneStart().
double t_radius::drNext |
next dr, as set in nextdr
Definition at line 61 of file radius.h.
Referenced by iter_end_check(), IterRestart(), IterStart(), radius_increment(), radius_next(), zero(), and ZoneStart().
double t_radius::dVeffAper |
dVeff is effec vol relative to inner radius this version is affected by the APERTURE SLIT | BEAM commands it should ONLY be used for quantities observed through the aperture if the APERTURE command is not used, dVeffAper and dVeffVol are identical
Definition at line 90 of file radius.h.
Referenced by ConvInitSolution(), FeIIAddLines(), H2_LinesAdd(), lincom(), lines(), lines_continuum(), lines_general(), lines_grains(), lines_hydro(), lines_lv1_k_zn(), lines_molecules(), radius_increment(), zero(), and ZoneStart().
double t_radius::dVeffVol |
dVeff is effec vol relative to inner radius, this version is not affected by the APERTURE command
Definition at line 84 of file radius.h.
Referenced by GravitationalPressure(), t_mean::MeanInc(), radius_increment(), zero(), and ZoneStart().
double t_radius::dVolOutwrd |
dVolOutwrd, dVolReflec, outward and reflected effective vols used to get outward and reflected beams, these include only the vol of the current shell times the covering factor, and a number between 0 and 1 that is the fraction of the beam that goes out or is reflected. this is determined by the rt covering factor
Definition at line 100 of file radius.h.
Referenced by outline_base_bin(), RT_continuum(), RT_diffuse(), and ZoneStart().
double t_radius::dVolReflec |
Definition at line 101 of file radius.h.
Referenced by outline_base_bin(), and ZoneStart().
variables that deal with the globule command, glbden, the density
Definition at line 131 of file radius.h.
Referenced by lgConvPres(), ParseGlobule(), and radius_next().
Definition at line 131 of file radius.h.
Referenced by InitDefaultsPreparse(), IterRestart(), lgConvPres(), ParseGlobule(), radius_next(), and ZoneStart().
the globule power
Definition at line 131 of file radius.h.
Referenced by lgConvPres(), ParseGlobule(), and radius_next().
the radius for the globule command
Definition at line 131 of file radius.h.
Referenced by InitDefaultsPreparse(), lgConvPres(), ParseGlobule(), radius_next(), and ZoneStart().
bool t_radius::lgCylnOn |
Definition at line 124 of file radius.h.
Referenced by ParseCylinder(), PrtFinal(), and zero().
bool t_radius::lgDR2Big |
this flag controlled in radius_first and says whether this option caused the first zone to have larger than optimal thickness
Definition at line 168 of file radius.h.
Referenced by PrtComment(), and radius_first().
bool t_radius::lgdR2Small |
flag saying that zone thickness became too small, likely because of an uncontrolled oscillation
Definition at line 115 of file radius.h.
Referenced by iter_end_check(), PrtComment(), zero(), and ZoneStart().
set true is calculations stops because zone thickness gets too small
Definition at line 180 of file radius.h.
Referenced by iter_end_check(), IterRestart(), PrtComment(), radius_next(), and zero().
bool t_radius::lgDrMnOn |
flag to turn off dr checking in dextdr when globule command entered
Definition at line 139 of file radius.h.
Referenced by ParseGlobule(), radius_first(), and zero().
lgPredLumin flag set true if intensities entered into st
Definition at line 142 of file radius.h.
Referenced by conorm(), and PrtFinal().
this says whether radius has been set - if true then can do luminosities, if false then only intensities
Definition at line 119 of file radius.h.
Referenced by conorm(), ParseBackgrd(), ParseBlackbody(), ParseCMB(), ParseCoronal(), ParseEnergy(), ParseIntensity(), ParseIonPar(), ParsePhi(), ParseRadius(), ParseTable(), PrtFinal(), PrtHeader(), and zero().
Definition at line 161 of file radius.h.
Referenced by ConvInitSolution(), DynaIterEnd(), ParseGlobule(), ParseSet(), radius_first(), radius_next(), and zero().
false, then sdrmin/sdrmax are limits to step size in cm, true, then are relative fraction of the current radius
Definition at line 160 of file radius.h.
Referenced by ParseSet(), radius_first(), radius_next(), and zero().
bool t_radius::lgSMinON |
lgSMinON is flag saying that set drmin has been enteed
Definition at line 164 of file radius.h.
Referenced by ParseSet(), radius_first(), and zero().
log of4 pi r_inner^2, 0 if intensities are printed, but is log of 4pi r_o^2 if any luminosity commands are entered
Definition at line 146 of file radius.h.
Referenced by conorm(), and PrtHeader().
double t_radius::r1r0sq |
ratio of square of outer edge of current zone to radius of illuminated face of cloud - note continuum is relative to outer edge after ZoneDone is called too
Definition at line 22 of file radius.h.
Referenced by cdSPEC(), cdSPEC2(), hmole_reactions(), iter_end_check(), lgConvPres(), lines_continuum(), pltcon(), PrtComment(), PrtContinuum(), PrtFinal(), radius_increment(), RT_continuum(), SaveDo(), sum_radiation(), zero(), and ZoneStart().
double t_radius::Radius |
the outer radius of the current zone
Definition at line 22 of file radius.h.
Referenced by AbundancesSet(), conorm(), ConvInitSolution(), CoolEvaluate(), GravitationalPressure(), highen(), InitSimPostparse(), ion_trim(), lgCheckMonitors(), lgConvPres(), optimize_func(), ParseBackgrd(), ParseBlackbody(), ParseCMB(), ParseCommands(), ParseCoronal(), ParseEnergy(), ParseF_nu(), ParseIntensity(), ParseIonPar(), ParsePhi(), ParseRadius(), ParseTable(), PressureChange(), PresTotCurrent(), PrtFinal(), radius_first(), radius_increment(), radius_next(), RT_continuum(), SaveDo(), SaveSpecial(), zero(), and ZoneStart().
double t_radius::Radius_mid_zone |
the radius, to center of last or current zone
Definition at line 22 of file radius.h.
Referenced by PrtZone(), Save_Line_RT(), SaveDo(), zero(), and ZoneStart().
double t_radius::rdfalt |
default inner radius when none set, log r =25 in scalar
Definition at line 127 of file radius.h.
Referenced by ParseBackgrd(), ParseBlackbody(), ParseCMB(), ParseCoronal(), ParseEnergy(), ParseF_nu(), ParseIntensity(), ParseIonPar(), ParsePhi(), ParseTable(), and zero().
double t_radius::rinner |
the inner radius in cm
Definition at line 22 of file radius.h.
Referenced by dense_parametric_wind(), GravitationalPressure(), highen(), iter_end_check(), IterEnd(), lgConserveEnergy(), lgConvPres(), ParseCommands(), PrtComment(), PrtFinal(), radius_first(), radius_increment(), radius_next(), RT_continuum(), sum_radiation(), zero(), and ZoneStart().
double t_radius::sdrmax |
Definition at line 156 of file radius.h.
Referenced by ConvInitSolution(), DynaIterEnd(), ParseGlobule(), ParseSet(), radius_first(), radius_next(), and zero().
double t_radius::sdrmin |
these are 1e-30 and 1e30 by default, and are set with "set dr" cmnds used as one of a pair of limits to how big or small zones get set dr command forces constant dr by setting both to same number
Definition at line 155 of file radius.h.
Referenced by ConvInitSolution(), ParseSet(), radius_first(), radius_next(), and zero().
double* t_radius::StopRadius |
stopping radius for the model, set with STOP RADIUS command [ITR DIM]
Definition at line 58 of file radius.h.
Referenced by InitSimPostparse(), ParseStop(), and zero().
double * t_radius::StopThickness |
total physical thickness of modeled region, (NOT OUTER RADIUS) this can set set as a stopping criteria, but if not set is 1e30 before first iteration. At end of each iteration, thickness is set to total depth from illuminated face to outer edge [ITR DIM]
Definition at line 22 of file radius.h.
Referenced by DynaIterEnd(), InitSimPostparse(), iter_end_check(), IterEnd(), ParseCommands(), ParseIterations(), ParseRadius(), ParseStop(), radius_first(), radius_increment(), radius_next(), zero(), and ZoneStart().