/home66/gary/public_html/cloudy/c13_branch/source/lines_service.h File Reference

Go to the source code of this file.

Defines

#define LOWDEN_LYMAN   0

Functions

void linadd (double xInten, realnum wavelength, const char *chLab, char chInfo, const char *chComment)
void outline_base (double dampXvel, double damp, bool lgTransStackLine, long int ip, double phots, realnum inwd, double nonScatteredFraction)
void outline_base_bin (bool lgTransStackLine, long int ip, double phots, realnum inwd, double nonScatteredFraction)
void lindst (double xInten, realnum wavelength, const char *chLab, long int ipnt, char chInfo, bool lgOutToo, const char *chComment)
void lindst (double dampXvel, double damp, double xInten, realnum wavelength, const char *chLab, long int ipnt, char chInfo, bool lgOutToo, const char *chComment)
void lindst (const TransitionProxy &t, const char *chLab, char chInfo, bool lgOutToo, const char *chComment)
double emergent_line (double emissivity_in, double emissivity_out, long int ipCont)
void PntForLine (double wavelength, const char *chLabel, long int *ipnt)
double GetGF (double eina, double enercm, double gup)
double eina (double gf, double enercm, double gup)
double abscf (double gf, double enercm, double gl)
double RefIndex (double EnergyWN)
realnum WavlenErrorGet (realnum wavelength)
double ConvRate2CS (realnum gHi, realnum rate)
double ConvCrossSect2CollStr (double CrsSectCM2, double gLo, double E_ProjectileRyd, double reduced_mass_grams)
double totlin (int chInfo)
const TransitionProxy FndLineHt (long int *level)

Define Documentation

#define LOWDEN_LYMAN   0

setting true will use low-density Lyman branching ratios

Definition at line 128 of file lines_service.h.

Function Documentation

double abscf ( double  gf,
double  enercm,
double  gl 
)

abscf convert gf into absorption coefficient

Parameters:
gf 
enercm 
gl 

Definition at line 122 of file lines_service.cpp.

References ASSERT, and DEBUG_ENTRY.

Referenced by ContCreatePointers(), FeIIPoint(), FillExtraLymanLine(), diatomics::init(), iso_create(), and iso_satellite_update().

double ConvCrossSect2CollStr ( double  CrsSectCM2,
double  gLo,
double  E_ProjectileRyd,
double  reduced_mass_grams 
)

convert collisional deexcitation cross section for into collision strength

Parameters:
CrsSectCM2 - the cross section
gLo - statistical weight of lower level of transition
E_ProjectileRyd - initial projectile energy in Rydbergs
reduced_mass_grams - reduced mass MpMt/(Mp+Mt) of projectile-target system

Definition at line 672 of file lines_service.cpp.

References ASSERT, BOHR_RADIUS_CM, DEBUG_ENTRY, ELECTRON_MASS, and PI.

Referenced by collision_strength_VF01(), hydro_vs_coll_str(), and S62_Therm_ave_coll_str().

double ConvRate2CS ( realnum  gHi,
realnum  rate 
)

convert down coll rate back into electron cs in case other parts of code need this for reference

Parameters:
gHi - stat weight of upper level
rate - deexcitation rate, units s-1

Definition at line 653 of file lines_service.cpp.

References ASSERT, t_dense::cdsqte, DEBUG_ENTRY, and dense.

Referenced by oi_cs().

double eina ( double  gf,
double  enercm,
double  gup 
)

eina convert a gf into an Einstein A

Parameters:
gf 
enercm 
gup 

Definition at line 84 of file lines_service.cpp.

References DEBUG_ENTRY, POW2, and TRANS_PROB_CONST.

Referenced by atmdat_readin(), ContCreatePointers(), and ForbiddenAuls().

double emergent_line ( double  emissivity_in,
double  emissivity_out,
long int  ipCont 
)

absorption due to continuous opacity

Parameters:
emissivity [erg cm-3 s-1] in inward direction
emissivity [erg cm-3 s-1] in outward direction
array index for continuum frequency

Definition at line 340 of file lines_service.cpp.

References t_opac::albedo, ASSERT, DEBUG_ENTRY, t_opac::E2TauAbsFace, t_opac::E2TauAbsOut, t_opac::E2TauAbsTotal, geometry, iteration, t_geometry::lgSphere, t_rfield::nupper, opac, and rfield.

Referenced by lincom(), lines_continuum(), RT_diffuse(), and RT_iso_integrate_RRC().

const TransitionProxy FndLineHt ( long int *  level  ) 

FndLineHt search through line heat arrays to find the strongest heat source

Parameters:
*level 

Definition at line 734 of file lines_service.cpp.

References ASSERT, TransitionProxy::associated(), TransitionProxy::Coll(), dBaseTrans, DEBUG_ENTRY, fixit(), CollisionProxy::heat(), HFLines, nHFLines, NISO, nLevel1, nSpecies, nWindLine, TauLine2, and TauLines.

Referenced by PrtComment(), radius_next(), and SaveHeat().

Here is the call graph for this function:

double GetGF ( double  eina,
double  enercm,
double  gup 
)

GetGF convert Einstein A into oscillator strength

Parameters:
eina 
enercm 
gup 

Definition at line 101 of file lines_service.cpp.

References ASSERT, DEBUG_ENTRY, POW2, and TRANS_PROB_CONST.

Referenced by atmdat_CHIANTI_readin(), atmdat_LAMDA_readin(), atmdat_readin(), atmdat_STOUT_readin(), ContCreatePointers(), FillExtraLymanLine(), hydro_vs_coll_str(), hydro_vs_deexcit(), HyperfineCreate(), diatomics::init(), iso_collide(), iso_create(), iso_satellite_update(), and ReadBadnellAIData().

void linadd ( double  xInten,
realnum  wavelength,
const char *  chLab,
char  chInfo,
const char *  chComment 
)

Definition at line 321 of file lines_service.cpp.

References DEBUG_ENTRY, and lincom().

Referenced by lines(), lines_continuum(), lines_general(), lines_grains(), lines_helium(), lines_hydro(), lines_lv1_k_zn(), lines_lv1_li_ne(), lines_lv1_na_ar(), lines_molecules(), and PutLine_base().

Here is the call graph for this function:

void lindst ( const TransitionProxy &  t,
const char *  chLab,
char  chInfo,
bool  lgOutToo,
const char *  chComment 
)

Definition at line 569 of file lines_service.cpp.

References EmissionProxy::damp(), EmissionProxy::dampXvel(), DEBUG_ENTRY, TransitionProxy::Emis(), TransitionProxy::ipCont(), lindst(), TransitionProxy::WLAng(), and EmissionProxy::xIntensity().

Here is the call graph for this function:

void lindst ( double  dampXvel,
double  damp,
double  xInten,
realnum  wavelength,
const char *  chLab,
long int  ipnt,
char  chInfo,
bool  lgOutToo,
const char *  chComment 
)

put forbidden line into stack, using index derived below

Parameters:
dampXvel - damping constant times Doppler velocity
damp - damping constant
xInten - local emissivity per unit vol
wavelength wavelength Angstroms
*chLab string label for ion
ipnt offset of line in continuum mesh
chInfo character type of entry for line - 'c' cooling, 'h' heating, 'i' info only, 'r' recom line
lgOutToo should line be included in outward beam?
*chComment string explaining line

Definition at line 520 of file lines_service.cpp.

References t_rfield::anu, ASSERT, t_geometry::covrt, DEBUG_ENTRY, EN1RYD, geometry, t_LineSave::ipass, lincom(), LineSave, outline_base(), and rfield.

Here is the call graph for this function:

void lindst ( double  xInten,
realnum  wavelength,
const char *  chLab,
long int  ipnt,
char  chInfo,
bool  lgOutToo,
const char *  chComment 
)

put forbidden line into stack, using index derived below

Parameters:
xInten - local emissivity per unit vol
wavelength wavelength Angstroms
*chLab string label for ion
ipnt offset of line in continuum mesh
chInfo character type of entry for line - 'c' cooling, 'h' heating, 'i' info only, 'r' recom line
lgOutToo should line be included in outward beam?
*chComment string explaining line

Definition at line 473 of file lines_service.cpp.

References t_rfield::anu, ASSERT, t_geometry::covrt, DEBUG_ENTRY, EN1RYD, geometry, t_LineSave::ipass, lincom(), LineSave, outline_base_bin(), and rfield.

Referenced by diatomics::H2_LinesAdd(), lindst(), lines(), lines_continuum(), lines_general(), lines_hydro(), lines_lv1_k_zn(), lines_lv1_li_ne(), lines_lv1_na_ar(), and PutLine_base().

Here is the call graph for this function:

void outline_base ( double  dampXvel,
double  damp,
bool  lgTransStackLine,
long int  ip,
double  phots,
realnum  inwd,
double  nonScatteredFraction 
)

Definition at line 401 of file lines_service.cpp.

References t_rfield::anu, ASSERT, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, get_ptr(), ipoint(), t_rfield::lgDoLineTrans, MAX2, MIN2, outline_base_bin(), rfield, SPEEDLIGHT, and VoigtU().

Referenced by lindst(), and TransitionProxy::outline().

Here is the call graph for this function:

void outline_base_bin ( bool  lgTransStackLine,
long int  ip,
double  phots,
realnum  inwd,
double  nonScatteredFraction 
)

Definition at line 440 of file lines_service.cpp.

References t_radius::BeamInIn, t_radius::BeamInOut, t_radius::BeamOutOut, DEBUG_ENTRY, t_rfield::DiffuseLineEmission, t_radius::dVolOutwrd, t_radius::dVolReflec, t_opac::ExpZone, opac, t_rfield::outlin, radius, t_rfield::reflin, rfield, and t_opac::tmn.

Referenced by lindst(), and outline_base().

void PntForLine ( double  wavelength,
const char *  chLabel,
long int *  ipnt 
)

PntForLine generate pointer for forbidden line

Parameters:
wavelength wavelength of line in Angstroms
*chLabel label for the line
*ipnt this is array index on the f, not c scale, for the continuum cell holding the line

Definition at line 588 of file lines_service.cpp.

References ASSERT, cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, ioQQQ, t_LineSave::ipass, ipLineEnergy(), LineSave, and RYDLAM.

Referenced by lines(), lines_general(), lines_lv1_k_zn(), lines_lv1_li_ne(), and lines_lv1_na_ar().

Here is the call graph for this function:

double RefIndex ( double  EnergyWN  ) 

RefIndex calculates the index of refraction of air using the line energy in wavenumbers, used to convert vacuum wavelengths to air wavelengths.

Parameters:
EnergyWN 

Definition at line 141 of file lines_service.cpp.

References ASSERT, and DEBUG_ENTRY.

Referenced by atmdat_CHIANTI_readin(), atmdat_LAMDA_readin(), atmdat_STOUT_readin(), Fe3Lev14(), FeIICreate(), FillExtraLymanLine(), diatomics::init(), iso_create(), lines_continuum(), and lines_setup().

double totlin ( int  chInfo  ) 

totlin sum total intensity of cooling, recombination, or intensity lines

Parameters:
chInfo chInfor is 1 char,
'i' information,
'r' recombination or
'c' collision

Definition at line 695 of file lines_service.cpp.

References cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, ioQQQ, LineSave, LineSv, t_LineSave::nsum, and t_tag_LineSv::SumLine.

Referenced by badprt(), lgConserveEnergy(), and PrtFinal().

realnum WavlenErrorGet ( realnum  wavelength  ) 

WavlenErrorGet - given the real wavelength in A for a line routine will find the error expected between the real wavelength and the wavelength printed in the output, with 4 sig figs,

Parameters:
wavelength 
Returns:
function returns difference between exact and 4 sig fig wl, so we have found correct line is fabs(d wl) < return

Definition at line 182 of file lines_service.cpp.

References ASSERT, DEBUG_ENTRY, LineSave, pow(), and t_LineSave::sig_figs.

Referenced by cdEmis(), cdLine(), debugLine(), GetOptLineInt(), lgCheckMonitors(), ParseNorm(), and PrtFinal().

Here is the call graph for this function:

 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Defines
Generated on 15 Nov 2012 for cloudy by  doxygen 1.6.1