#include "cddefines.h"
#include "rfield.h"
#include "iterations.h"
#include "physconst.h"
#include "doppvel.h"
#include "dense.h"
#include "trace.h"
#include "opacity.h"
#include "ipoint.h"
#include "geometry.h"
#include "continuum.h"
Include dependency graph for cont_createmesh.cpp:
Go to the source code of this file.
Functions | |
STATIC void | read_continuum_mesh (void) |
STATIC void | fill (double fenlo, double fenhi, double resolv, long int *n0, long int *ipnt, bool lgCount) |
STATIC void | rfield_opac_malloc (void) |
STATIC void | ChckFill (void) |
void | ContCreateMesh (void) |
STATIC void ChckFill | ( | void | ) |
Definition at line 354 of file cont_createmesh.cpp.
References t_rfield::anu, ASSERT, continuum, DEBUG_ENTRY, t_rfield::egamry, t_rfield::emm, t_continuum::filbnd, ioQQQ, ipoint(), t_continuum::nrange, t_rfield::nupper, rfield, and t_rfield::widflx.
Here is the call graph for this function:
void ContCreateMesh | ( | void | ) |
set up continuum energy mesh if first call, otherwise reset to original mesh
Definition at line 39 of file cont_createmesh.cpp.
References t_rfield::anu, t_rfield::anu2, t_rfield::AnuOrg, DEBUG_ENTRY, ioQQQ, t_trace::lgTrace, t_rfield::nupper, rfield, and trace.
Referenced by cloudy(), and ParseCompile().
STATIC void fill | ( | double | fenlo, | |
double | fenhi, | |||
double | resolv, | |||
long int * | n0, | |||
long int * | ipnt, | |||
bool | lgCount | |||
) |
Definition at line 247 of file cont_createmesh.cpp.
References t_rfield::anu, ASSERT, cdEXIT, continuum, DEBUG_ENTRY, t_continuum::filbnd, t_continuum::fildel, t_continuum::filres, t_continuum::ifill0, ioQQQ, t_trace::lgConBug, t_trace::lgPtrace, t_trace::lgTrace, t_continuum::nStoredBands, t_rfield::nupper, rfield, ShowMe(), trace, and t_rfield::widflx.
Here is the call graph for this function:
STATIC void read_continuum_mesh | ( | void | ) |
Definition at line 630 of file cont_createmesh.cpp.
References cdEXIT, continuum, DEBUG_ENTRY, FFmtRead(), t_continuum::filbnd, t_continuum::fildel, t_continuum::filres, t_continuum::ifill0, INPUT_LINE_LENGTH, ioQQQ, t_trace::lgTrace, MALLOC, t_continuum::nStoredBands, open_data(), read_whole_line(), t_continuum::ResolutionScaleFactor, t_continuum::StoredEnergy, t_continuum::StoredResolution, and trace.
Here is the call graph for this function:
STATIC void rfield_opac_malloc | ( | void | ) |
Definition at line 431 of file cont_createmesh.cpp.
References t_rfield::anu, t_rfield::anu2, t_rfield::anu3, t_rfield::anulog, t_rfield::AnuOrg, t_rfield::anusqr, ASSERT, ATOMIC_MASS_UNIT, t_dense::AtomicWeight, BOLTZMANN, t_rfield::comdn, t_rfield::comup, t_rfield::ConEmitOut, t_rfield::ConEmitReflec, t_rfield::ConInterOut, t_rfield::ConOTS_local_OTS_rate, t_rfield::ConOTS_local_photons, t_rfield::ConRefIncid, t_rfield::ConTabRead, t_rfield::ContBoltz, t_rfield::convoc, t_rfield::csigc, t_rfield::csigh, DEBUG_ENTRY, dense, t_rfield::fine_anu, t_rfield::fine_ener_hi, t_rfield::fine_ener_lo, t_rfield::fine_opac_nelem, t_rfield::fine_opac_nresolv, t_rfield::fine_opac_velocity_width, t_rfield::fine_opac_zone, t_rfield::fine_opt_depth, t_rfield::fine_resol, t_rfield::flux, t_rfield::flux_accum, t_rfield::flux_beam_const, t_rfield::flux_beam_const_save, t_rfield::flux_beam_time, t_rfield::flux_isotropic, t_rfield::flux_isotropic_save, t_rfield::flux_time_beam_save, t_rfield::flux_total_incident, t_rfield::gff, t_rfield::ipFineConVelShift, t_rfield::ipnt_coarse_2_fine, LIMELM, t_rfield::line_count, MALLOC, NCELL, t_rfield::nfine, t_rfield::nfine_malloc, t_rfield::nupper, t_rfield::OccNumbBremsCont, t_rfield::OccNumbContEmitOut, t_rfield::OccNumbDiffCont, t_rfield::OccNumbIncidCont, t_rfield::otscon, t_rfield::otsconNew, t_rfield::otslin, t_rfield::otslinNew, t_rfield::otssav, t_rfield::outlin, t_rfield::outlin_noplot, t_rfield::reflin, rfield, SPEEDLIGHT, t_rfield::SummedCon, t_rfield::SummedDif, t_rfield::SummedDifSave, t_rfield::SummedOcc, TotalInsanity(), t_rfield::TotDiff2Pht, t_rfield::trans_coef_total, t_rfield::trans_coef_zone, and t_rfield::widflx.
Here is the call graph for this function: